Fresco is 100% natural and contains no VOC's.

Whether you want to use it for a Large project or small, Fresco is packaged in 2 different size. It is not only great for furniture but can be used on home decor, such as picture frames, signs, planter pots, etc and can also be used on your walls (as seen in the side picture). 

Our small Package will make 1 Pint of the Sea Swept or Crackled Heavy Texture look, or 5 Pints of Flat Matte Chalky Finish. Enough to paint the huge 7ft wardrobe you see here!

Size:

• Small Bag 75 grams

• Large Bag 400 grams

Depending on your mix and application, you will get a different end result.

CRACKLED HEAVY TEXTURE: 

Mix 1-part Fresco to 2 parts Fusion Mineral Paint.

Apply a thick (2-3 mm) layer of mixture to your paint ready surface. Allow to set for 10-20 minutes. Knock down any heavy lumps by passing your brush over them. The heavier the texture the larger the cracks. Applying sunlight or heat will increase crackle effect.

FLAT MATTE CHALK FINISH:

Mix 1-part Fresco to 8 parts Fusion Mineral Paint.

1 Small Bag will make 2.5 Quarts or 5 Pints of Flat Matte Chalky Finish.

Apply mixture in various directions for a hand painted look immediately upon application. If any lumps occur, brush them out. If using the included scoop, add 4 scoops per Pint for this look. Add more or less as desired.

SEA SWEPT:

Mix 1-part Fresco to 2 parts Fusion Mineral Paint.

Apply mixture to your paint ready surface. Allow to set for 10-20 minutes then knock down any heavy lumps by passing your brush over them. Allow to fully dry, then continue with additional colours and layers of paint. Fresco is not required in additional layers of paint. *Stippling adds texture.

Complete the look by wet sanding to expose your multiple layers of paint and texture! For best results use a 220 grit sanding sponge. For antiquing, use our Coloured Wax, or Antiquing Glaze to enhance all the details.

For more info on Fusion Mineral Paint and their products, please visit https://fusionmineralpaint.com